Change a Propane Tank
Forklifts powered by propane are common in warehouse environments. These forklifts have a propane mount situated at the back of the driver. These tanks need to be replaced every so often because they have limited lifespans. Forklift drivers must utilize caution when handling propane tanks. Compressed gases are dangerous, particularly because the gas is flammable. Utilize caution when replacing and removing propane tank to avoid injury.
1 If there is a need to replace the propane tank, the first step is to stop the lift truck, then turn off the tank valve. The lift truck should be left on until the engine dies. This process burns off the gas in the transfer hose that connects the tank and the engine. Before taking the second steps, wear the correct safety equipment, like insulated gloves made of either neoprene or leather. It is essential for you to protect your skin from contact with the compressed gas, which is extremely cold.
2 The hose of the tank has to be disconnected, followed by removing the tank from its holding straps. When putting in a new tank, tighten the nut to reconnect the holding straps and to reattach the hose at the valve of the tank.
3 You could inspect for leaks by applying soapy water to the valve and slightly opening it. Leaking gas will cause bubbles to froth around the value. If this happens, check the valve area and the connection hose at the nut. The connecting nut should be re-tightened if you detect any leaks around the valve area, and afterward perform the leak checking process once more. Persistent leaks mean that the nut and connecting hose should be replaced. However, if replacing the hose and nut still does not stop the leak, the tank must be replaced.
4 Open the valve all the way to allow the gas to fill the connecting hose. Afterward you could start the lift truck and resume working.